Fig 14 Carbon Steel Strainer

Object metadata

• _bimspec_guid0
• _created byDayle Zieleniewski
• _current revision1
• _distributed bywww.bimstore.co.uk
• A70.000000000000 mm
• Assembly CodeD30
• Asset TypeFixed
• B51.000000000000 mm
• Blend End30.000000000000 mm
• BodyCarbon steel 1.0460
• Body Design ConditionsANSI 300
• Body Radius16.000000000000 mm
• C80.000000000000 mm
• CapCarbon steel 1.0460
• Cap GasketReinforced exfoliated graphite
• Carbon SteelSpirax_Sarco-Carbon_Steel
• CertificationThe product is available with a manufacturer?s Typical Test Report for the body and cap as standard and EN 10204 3.1 to special order at extra cost. Note: All certification /inspection requirements must be stated at the time of order placement.
• Classification NameUniclass1.4
• Classification ValueL7136
• Created ByUKEnquiries@SpiraxSarco.com
• Created OnJuly 2014
• D32.000000000000 mm
• DescriptionThe Fig 14 is a carbon steel Y-type strainer designed to remove scale, rust and other debris from the pipeline. The standard stainless steel screen is 0.8 mm perforations.
• Designed for a maximum cold hydraulic test pressure of: bar g78
• DisposalThe product is recyclable. No ecological hazard is anticipated with disposal of this product, providing due care is taken.
• Documentation Installation Guidewww.spiraxsarco.com/pdfs/IM/s60_17.pdf
• Documentation Technicalwww.spiraxsarco.com/pdfs/TI/p063_02.pdf
• Duration UnitYears
• Expected Life0
• K Coefficient2.6
• Loss Method2
• ManufacturerSpirax Sarco Ltd
• Minimum Operating Temperature10.000000000000 °C
• ModelFig 14HP Carbon Steel Strainer
• Model NumberFig 14HP Carbon Steel Strainer
• Monel Strainer ScreenNo
• Nut Size19.000000000000 mm
• Optional ExtrasStainless Steel Strainer Screens (Perforations 1.6 or 3mm, Mesh 40,100,200) Monel Strainer Screens (Performations 0.8 or 3mm, Mesh 100), Blowdown or Drain Valve Connections (The cap can be drilled to enable a blowdown or drain valve to be fitted. Please see Product Information Link for sizes.)
• Pipe Radius5.000000000000 mm
• Pipe Size10.000000000000 mm
• Pipe Straight End10.000000000000 mm
• Plate Offset18.000000000000 mm
• PMA Maximum Allowable Pressure136.1 bar g @ 38
• PMO Maximum Operating Temperature (Saturated)136.1 bar g @ 38
• Product Documentation Linkwww.spiraxsarco.com/pdfs/TI/p063_02.pdf
• Replacement Cost0
• Screening Area0.003000000000 m²
• SizeDN10
• Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
• Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
• Stainless Steel Strainer ScreenYes
• StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC
• Strainer Body32.000000000000 mm
• Strainer Diameter10.000000000000 mm
• Strainer Length130.000000000000 mm
• Strainer Radius16.000000000000 mm
• Strainer ScreenStainless steel A240 316L
• Strainer Screen Size0.8
• TMA Maximum Allowable Temperature425
• TMO Maximum Operating Temperature425
• Type CommentsDN10
• Type NameDN10
• Uniclass 290-25-45/350
• URLwww.spiraxsarco.com/uk/
• WarningThe strainer cap gasket contains a thin stainless steel support ring, which may cause physical injury if it is not handled and disposed of carefully.
• Warranty Duration Labour0
• Warranty Duration Parts0
• Warranty Duration UnitYears
• Weight0.490000000000 kg