Fig 12 SG Iron Strainer

5.7k
0
4.7 / 5
Rate this product

-

Compliant

BS1192:4

Compliant

BSB

Compliant

Object Data

2 Revision

Last Updated

13/07/2020

Download BIM

Add to collection

Available for:

The Fig 12 is an SG iron screwed Y-type strainer. The standard stainless steel screen is 0.8 mm perforations. As options, other perforations and mesh sizes are available as well as monel screens. The strainer cap can be drilled and tapped for blowdown and drain valves if required.

This download includes all available size variations for the Spirax Sarco Fig 12 SG Iron Strainer.

Further information can be found on Spirax Sarco: Strainers and Filters for steam systems | UK | Spirax Sarco

_bimspec_guid0
_created byDayle Zieleniewski
_current revision1
_distributed bywww.bimstore.co.uk
A87.000000000000 mm
Assembly CodeD30
Asset TypeFixed
B55.000000000000 mm
Blend End30.000000000000 mm
BodySG iron DIN 1693 GGG 40
Body Design ConditionsPN25
Body Radius16.000000000000 mm
BoltCarbon steel BS 3692 Gr. 8.8
C79.000000000000 mm
CapCarbon steel 1.0460 and ASTM A105N
Cap GasketReinforced exfoliated graphite
Cap VisYes
Carbon SteelSpirax_Sarco-Carbon_Steel
CertificationThis product is available with a manufacturers' Typical Test Report. Note: All certification / inspection requirements must be stated at the time of order placement
Classification NameUniclass1.4
Classification ValueL7136
Created ByUKEnquiries@SpiraxSarco.com
Created OnJuly 2014
D32.000000000000 mm
DescriptionThe Fig 12 is an SG iron screwed Y-type strainer. The standard stainless steel screen is 0.8 mm perforations. As options, other perforations and mesh sizes are available as well as monel screens. The strainer cap can be drilled and tapped for blowdown and drain valves if required.
Designed for a maximum cold hydraulic test pressure of: bar g38
DisposalThe product is recyclable. No ecological hazard is anticipated with disposal of this product providing due care is taken.
Documentation Installation Guidewww.spiraxsarco.com/pdfs/IM/s60_17.pdf
Documentation Technicalwww.spiraxsarco.com/pdfs/TI/p163_01.pdf
Duration UnitYears
Expected Life0
Installation NoteThe strainer should be installed in the direction of flow, as indicated on the body. On applications involving steam or gases the pocket should be in the horizontal plane. On liquid systems the pocket should point downwards. Suitable isolation valves must be installed to allow for safe maintenance and trap replacement.
K Coefficient3.6
Loss Method2
Maintenance NoteMaintenance can be completed with the strainer in the pipeline.
ManufacturerSpirax Sarco Ltd
MaterialSG Iron
Maximum Allowable Pressure16 bar g at 120
Maximum Allowable Temperature260
Maximum Operating Pressure (Saturated Steam Service)13.2 bar g at 196
Maximum Operating Temperature260
Minimum Operating Temperature10.000000000000 °C
ModelFig 12 SG Iron Strainer
Model NumberFig 12 SG Iron Strainer
Monel Strainer ScreenNo
Nut Size22.000000000000 mm
Optional ExtrasStainless Steel Strainer Screens (Perforations 1.6 or 3mm, Mesh 40,100,200) Monel Strainer Screens (Performations 0.8 or 3mm, Mesh 100), Blowdown or Drain Valve Connections (The cap can be drilled to enable a blowdown or drain valve to be fitted. Please see Product Information Link for sizes.)
Pipe Radius7.500000000000 mm
Pipe Size15.000000000000 mm
Pipe Straight End20.000000000000 mm
Plate Offset18.000000000000 mm
PMA Maximum Allowable Pressure25 bar g @ 120
PMO Maximum Operating Temperature (Saturated)21 bar g
Product Documentation Linkwww.spiraxsarco.com/pdfs/TI/p163_01.pdf
Replacement Cost0
Screening Area0.003000000000 m²
SG IronSpirax_Sarco-SG_Iron
SizeDN15
Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
Square VisNo
Stainless Steel Strainer ScreenYes
StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC
Strainer Body32.000000000000 mm
Strainer Diameter15.000000000000 mm
Strainer Length130.000000000000 mm
Strainer Radius16.000000000000 mm
Strainer ScreenStainless steel 316L
Strainer Screen Size0.8
TMA Maximum Allowable Temperature260
TMO Maximum Operating Temperature260
Type CommentsDN15
Type NameDN15
Uniclass 290-25-45/350
URLwww.spiraxsarco.com/uk/
WarningThe strainer cap gasket contains a thin stainless steel support ring, which may cause physical injury if it is not handled and disposed of carefully.
Warranty Duration Labour0
Warranty Duration Parts0
Warranty Duration UnitYears
WasherCarbon steel BS 4320 TI Form A
Weight0.470000000000 kg