For shower installations with a hand shower and a double jet overhead shower.
With a wastewater heat recovery system (two heat exchangers)
It transfers the residual heat from the water used in the shower to preheat the incoming water. Up to 48% less energy is needed to heat the shower water, compared to a shower without heat recovery, based on a flow rate of 9.2 l/min (at 3 bar), inlet water at 10 °C and shower temperature at 38 °C.
Includes:
Two copper tubes for heat recovery.
Inspection access (to be tiled) to maintain the water supply and electronic components.
External switched-mode power supply 230 V AC, 50 Hz to 24 V DC safety voltage.
Plug and play system
IPx4 via revision port
Wastewater connection behind the shower drain.
GROHE Rapido SmartBox recessed element (35 604)
Pre-assembled kit for installation 9.5 l/min for overhead shower (107 241 9990)
Pre-assembled wall outlet for hand shower.
Pre-assembled and insulated mixed water pipes
For installation in drywall or cladding.
Self-supporting galvanized steel frame
Fully pre-assembled
Adjustable depth
2 entrances at the height of the inspection access, 1/2”
Minimum installation depth (from rough wall to final finish) 185-200 mm
Minimum installation depth (from the rough wall to the front of the frame) 160 mm
Inspection door for double plasterboard panels, 2 x 12.5 mm thick.
Shower head height adjustable by 180 mm
Sealing fleeces
Leakage test performed at the factory gate.
Suitable for 3-function sets in combination with the GROHE Rapido SmartBox.
Suitable for GROHE shower outlet bends with 1/2” male threaded connections.
Suitable for the Rainshower SmartActive 310 2-jet shower with a 430 mm shower arm.
Perfect fit for Grohtherm 103 997 0000 and 103 998 0000 concealed shower systems .
Suitable only for use with thermostats.
For wall mounting, order wall brackets 38 558 00M (sold separately, 2 sets required).
Descriptionfor shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system (two heat exchangers)
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 48 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
two heat recovery copper pipes
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
Featuresfor shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system (two heat exchangers)
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 48 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
two heat recovery copper pipes
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
ModelGROHERAPIDO Module for installing Duo recessed shower (1057879990)
Model Number1057879990
Model ReferenceGROHERAPIDO Module for installing Duo recessed shower
NBS DescriptionShower thermostatic water supply sets
NBS Noten/a
NBS Object NameGrohe - Shower thermostatic water supply sets
NBS Office Master Tagn/a
NBS Reference45-35-70/335
Nominal Depth0 mm
Nominal Height0 mm
Nominal Length0 mm
PQ Diagram Linkn/a
Primary MaterialGrohe - Chrome
Product Descriptionfor shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system (two heat exchangers)
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 48 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
two heat recovery copper pipes
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
You must log in to write a comment
Login or Join
Bimstore on 18 November 2026
Be the first to write a comment...