with waste water heat recovery system (one heat exchanger)
For installing a shower system with hand shower and dual-jet shower head
with waste water heat recovery system
Uses the residual heat from the used water to heat the incoming fresh water. Saves up to 42% energy for heating the water compared to a conventional shower system. Based on a flow rate of 9.2 l/min (at 3 bar), 10 °C incoming water and 38 °C shower water temperature.
includes:
one heat recovery copper pipe
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via inspection door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
Load-bearing steel frame,
powder-coated
completely pre-assembled
with
depth adjustment
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
Descriptionwith waste water heat recovery system (one heat exchanger)
for shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 42 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
one heat recovery copper pipe
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
Featureswith waste water heat recovery system (one heat exchanger)
for shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 42 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
one heat recovery copper pipe
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
ModelGROHERAPIDO Element for duo concealed shower installation (1057869990)
Model Number1057869990
Model ReferenceGROHERAPIDO Element for duo concealed shower installation
NBS DescriptionShower thermostatic water supply sets
NBS Noten/a
NBS Object NameGrohe - Shower thermostatic water supply sets
NBS Office Master Tagn/a
NBS Reference45-35-70/335
Nominal Depth0 mm
Nominal Height0 mm
Nominal Length0 mm
PQ Diagram Linkn/a
Primary MaterialGrohe - Chrome
Product Descriptionwith waste water heat recovery system (one heat exchanger)
for shower installations with one hand shower and a duo spray head shower
with waste water heat recovery system
Transfers residual heat from used shower water to preheat incoming fresh water. Up to 42 % less energy required to heat shower water vs. a shower without heat recovery, based on 9.2 l/min flow (at 3 bar), 10 °C inlet water and 38 °C shower temperature.
including:
one heat recovery copper pipe
revision access (to be tiled) to maintain water supply and electronic components
external switching power supply 230 V AC, 50 Hz to safety voltage 24 V DC
plug and play system
IPx4 via revision door
waste water connection behind shower drain
pre-mounted rough-in set GROHE Rapido SmartBox (35 604)
pre-mounted rough-in set 9.5 l/min for head shower (107 241 9990)
pre-mounted wall outlet for hand shower
pre-mounted and insulated mixed water pipes
for on-the-wall installations or dry-cladding
powder coated steel frame, self-supporting
completely pre-assembled
depth adjustable
2 inlets at revision access height, 1/2"
min. installation depth (from rough wall to end finish) 185-200 mm
minimum installation depth (from rough wall to frame front) 160 mm
revision door for double plasterboard (2 x 12.5 mm)
head shower outlet height adjustable by 180 mm
sealing fleeces
leak test done ex factory
suitable for concealed 3-function trim sets in combination with GROHE Rapido SmartBox
suitable for GROHE shower outlet elbows with male connection threads, 1/2"
suitable for Rainshower SmartActive 310 2-spray head shower with 430 mm shower arm
perfect fit for Grohtherm concealed shower systems 103 997 0000 and 103 998 0000
suitable only for use with thermostat
for on-the-wall installation please order wall brackets 38 558 00M (sold separately, 2 sets needed)
professional exclusive
You must log in to write a comment
Login or Join
Bimstore on 18 November 2026
Be the first to write a comment...