Ideal Heating: District heating and the power of POD

Decarbonising heating and hot water in buildings is an existential challenge for our industry. Still, one solution that is set for a resurgence is district heating, or heat networks, thanks to the energy efficiencies that can be achieved and the scalability on offer.

Charlie Mowbray, Commercial Product Manager, Groupe Atlantic UK, ROI & NA, explains more about the networks and the role they can play on the pathway to net zero. 

Around 500,000 UK properties are currently connected to district heating networks, but the government’s Clean Growth Strategy predicts this could rise to more than five million by 2050. To help make this happen, £288 million has been committed to support the development of new heat networks through the Green Heat Network Fund (GHNF), which is open to the public, private and third sector and runs until 2025. 

But what is district heating, and how does it work?
A district heating system delivers thermal energy in the form of hot water from a central source to end users using a network of insulated pipes. This network could be designed to serve a single block of flats or an entire city. Every district heating system has three main elements:
1. The energy centre sits at the heart of a heat network, heating the hot water that is distributed around the system. Although energy centres can use almost any heat source, to take advantage of the GHNF, low carbon heat sources must be used. 
2. The energy centre connects to the distribution network, the insulated pipes that deliver hot water to end users.
3. Each end user then has a Heat Interface Unit (HIU), like the Ideal Heating POD, which transfers heat from the distribution network to the end user’s heating system or is used to generate instantaneous hot water. The HIU looks just like a domestic combi boiler from the outside and has similar controls, but instead of burning gas, it uses heat exchangers to transfer thermal energy from the hot water in the distribution network to the water in the property’s heating and hot water systems. 

What are the advantages?
District heating is a flexible, tried and tested technology that has been safely and effectively heating homes around the world for more than a century.
Having a single heat source, the energy centre, can generate economies of scale and help the whole system operate more efficiently, in turn reducing carbon emissions. The versatility of heat networks means they are suitable for all building types, from bungalows to high-rise flats, businesses and public buildings, regardless of their age or fabric. 
While they are typically used in high-density built-up areas such as city centres, they can also heat new build developments and campuses as well as off-gas communities in rural locations. 
Heat networks can achieve lower energy bills for end users because a central energy centre can be more efficient than individual boilers in each property. 
The impact on greenhouse gas emissions can be even more impressive. Veolia reports that the District Energy heat network that it operates in Sheffield cuts carbon emissions by more than half, and analysis by Devon County Council suggests that a plan to power a new development of 2,500 homes using district heating will reduce carbon emissions by up to 70 per cent. 

The outlook from Ideal Heating
The UK is taking a slightly different approach to district heating than they have on the continent. There, water leaving the central energy centre may be up to 90C, whereas the drive in the UK is to have a maximum primary temperature of 70C. This gives greater cost and efficiency benefits as a wider range of heat sources can be used, from heat pumps to energy from waste, recovered geothermal energy and renewable energy. 
Ideal Heating has developed the POD HIU specifically to suit these systems, which comes in two models: 
• POD Indirect is a twin plate appliance to provide complete separation from the heat network for both heating and hot water. 
• POD Direct is a single plate appliance, enabling heat from the network to directly heat the heating system and indirectly generates instantaneous Domestic Hot Water (DHW). 
All the indirect POD heat interface units are BESA registered.
The rapid rollout of heat networks brings an exciting proposition on the pathway to net zero. 


With over 100 years of experience providing high-quality heating solutions, we are committed to supporting the UK on its drive to net zero. We recognise the role we can play in helping to make that journey as easy as possible for contractors and installers, not just from the perspective of the devices we design but also the training we offer to ensure everyone can be upskilled in installation.

Find out more about Ideal Heating by visiting their Manufacturer Profile. Alternatively, check out their websiteLinkedInInstagramFacebook or Twitter.

Community comments

Latest News

Webinar Replay: BIM’s Role In Product Specification

Posted 27.03.2024

Introduction to BIM Webinar: BIM’s Role In Product Specification
Play VideoPlay Video

This webinar series was curated especially for an audience concerned with the Australian built environment. A range of industry pioneers revealed how BIM & Revit content is going to transform the world of construction there. It featured practical tips and real-life experience from knowledgeable experts. In this second episode, hear from Adam Ward, CTO of Space Group. This very accessible session is for people at all stages of their Building Information Modeling (BIM) journey. He will take you through BIM and its role in product specification.

Hamworthy Heating: The benefits of Stainless Steel in hot water generation

Posted 26.03.2024

With stainless steel becoming a popular choice for hot water products, our friends at Hamworthy Heating take a look at some of the key factors driving this trend.

Fire Protection Is Key for New FrameSafe FR Membrane

Posted 25.03.2024

Leading manufacturer Glidevale Protect has launched Protect FrameSafe FR - a new Class A2-s1, d0 flame retardant external wall breather membrane offering fire protection across low, medium and high-rise buildings.

CloseClose