Fluidmaster: Simple water saving options offer significant impact

As well as the obvious areas of gas and electricity efficiency improvements, it’s often overlooked that water conservation, in all its forms, can create a significant reduction in use of power both within the home and via the mechanisms used throughout the supply process.

Adrian Hibbert from leading UK toilet solutions and water management manufacturer, Fluidmaster UK, discusses substantial options for water-saving through more efficient flushing and filling mechanisms.


There are 19 privately owned water and wastewater or water-only utility companies in England and Wales that reportedly consume around 2-3% of the overall national energy supply. This makes the sector the fourth most energy-intensive industry. For that reason, creating efficiencies for water-related energy use across homes (and non-residential buildings) throughout the country will have substantial benefits in terms of reducing CO2 emissions and in turn reducing bills for individual residents.

Water consumption per capita has risen exponentially in modern times, with UK residents now using over 142 litres of water per day each, according to findings from the Energy Saving Trust. Toilets are the second biggest water user in the home (second only to showers).

Approximately 30% of total water used in a home is used to flush the toilet. This is the same high-quality drinking water that we use throughout the rest of the home.
 
Whilst these increases in water consumption are putting a strain on our water resources and our purses, there are small changes that can be made by developers, specifiers, facilities management companies, manufacturers and by homeowners themselves to considerably reduce water use with very little effort.

We have the technology to offer water-efficient products without compromising the experience for the end user.

One such option is to consider the recently released Fluidmaster AirGap 6000 water-saving toilet cistern fill valve, which has been designed to offer substantial water savings with every single flush. By only commencing the filling process, when the toilet cistern is empty, savings of 1 litre per flush can be made with every single use of the loo. Considering that the average person flushes the toilet five times per day and that the average UK household occupancy is 2.5 people; this equates to a potential reduction in water consumption by over 4,500 litres per annum in an average UK household from the installation of just one water-saving AirGap.

When this is coupled with the opportunities to further reduce toilet water consumption, through dual-flush options like the Fluidmaster Ultra Dual Flush Syphon, it’s clear to see that simple swaps within a toilet cistern arrangement can make a huge difference.

As an accountable and environmentally conscious UK manufacturer, we feel a huge responsibility to reinforce these simple water-saving messages, which offer eco-friendly and money saving options across the board.

On 8 July 2020, the Chancellor announced a £2 billion Green Homes Grant scheme to upgrade homes across England. Under this, £500 million funding will be delivered through local authorities, to improve the energy efficiency of low-income households. Local authorities can bid for funding under this scheme to improve the energy efficiency of low-income households in their area.

As Yvonne Orgill, MD at the Unified Water Label subsequently pointed out:  "It is disappointing that water-efficient and energy-saving bathroom products, such as taps, showers and WC’s did not feature in the details of the Green Homes Grant, which could have encouraged many to upgrade their old bathroom fittings.

"As an industry, we have the technology to offer water-efficient products without compromising the experience for the end-user. Many manufacturers are also supporting the Unified Water Label, which identifies the water and energy consumption of products, helping consumers make more informed choices."


As a UK manufacturer, we feel it is vital to reinforce the benefits of the installation of bathroom water-saving devices. With many new build properties containing two or three toilets (if not more), the impact of water-saving toilet fill and flush technology could be hugely significant. Big savings can be made when it comes to toilet flush and fill; specifically, with the water-saving AirGap 6000 fill valve and the Fluidmaster dual flush options. As part of a sustainable build scheme, the installation of an AirGap 6000 fill valve can also contribute towards the developer achieving their BREEAM rating.

For the environmentally-conscious specifier, there are significant benefits too, to sourcing products from a UK manufacturer like Fluidmaster. Firstly, in the reliability and quality of the products on offer, which are all subject to appropriate compliance testing, certification and registration with applicable industry schemes.

Water-saving toilet technology from both a fill and flush perspective is certainly an area that can offer a fast and simple solution to effectively reducing water consumption for both individual consumers and private and public sector buildings. When installed in conjunction with other widely available water-saving measures and initiatives, it is possible that coming years may even see domestic water consumption on the decline.

Community comments

Latest News

Webinar Replay: BIM’s Role In Product Specification

Posted 27.03.2024

Introduction to BIM Webinar: BIM’s Role In Product Specification
Play VideoPlay Video

This webinar series was curated especially for an audience concerned with the Australian built environment. A range of industry pioneers revealed how BIM & Revit content is going to transform the world of construction there. It featured practical tips and real-life experience from knowledgeable experts. In this second episode, hear from Adam Ward, CTO of Space Group. This very accessible session is for people at all stages of their Building Information Modeling (BIM) journey. He will take you through BIM and its role in product specification.

Hamworthy Heating: The benefits of Stainless Steel in hot water generation

Posted 26.03.2024

With stainless steel becoming a popular choice for hot water products, our friends at Hamworthy Heating take a look at some of the key factors driving this trend.

Fire Protection Is Key for New FrameSafe FR Membrane

Posted 25.03.2024

Leading manufacturer Glidevale Protect has launched Protect FrameSafe FR - a new Class A2-s1, d0 flame retardant external wall breather membrane offering fire protection across low, medium and high-rise buildings.

CloseClose