S1 SG Iron Separator

Object metadata

• _bimspec_guid0
• _created byDayle Zieleniewski
• _current revision1
• _distributed bywww.bimstore.co.uk
• A222.000000000000 mm
• Assembly CodeD30
• Asset TypeFixed
• B377.000000000000 mm
• BaffleCast Iron DIN 1691 Gr. GG20
• BodySG Iron DIN 1693 Gr. GGG 40
• Body Design ConditionsPN16
• BoltsSteel BS 1768 Gr. 5
• Bottom pipe103.666666666667 mm
• BSP Pipe ConnectionNo
• BushSteel ASTN A105
• C143.000000000000 mm
• CertificationThis product is available with a manufacturers' Typical Test Report. Note: All certifi cation / inspection requirements must be stated at the time of order placement.
• Classification NameUniclass1.4
• Classification ValueL7136
• CoverSG Iron DIN 1693 Gr. GGG 40
• Created ByUKEnquiries@SpiraxSarco.com
• Created OnJuly 2014
• Curve Offset50.000000000000 mm
• Curve Offset 216.666666666667 mm
• D152.000000000000 mm
• DescriptionThe S1 is a cast SG iron baffle type separator used for the removal of entrained liquids in steam, compressed air and gas systems. The fi tting of insulation jackets will increase the performance of the separator.
• DisposalThis product is recyclable. No ecological hazard is anticipated with the disposal of this product providing due care is taken.
• Documentation Installation Guidewww.spiraxsarco.com/pdfs/IM/p023_55.pdf
• Documentation Technicalwww.spiraxsarco.com/pdfs/TI/p023_02.pdf
• Duration UnitYears
• E15.000000000000 mm
• E Radius7.500000000000 mm
• Expected Life0
• F50.000000000000 mm
• F Pipe60.000000000000 mm
• GasketSemi-rigid Graphite Laminate
• Installation NoteInstall in a horizontal pipeline with the drain directly below. Note: To ensure that any separated liquid is drained away quickly, a suitable liquid drainer /steam trap must be connected to the drain connection 'E' - consult Spirax Sarco for further details.
• K Coefficient0
• KeynoteS
• Loss Method0
• ManufacturerSpirax Sarco Ltd
• MaterialSG Iron
• Maximum Allowable Pressure16 bar g at 120
• Maximum Allowable Temperature260
• Maximum Operating Pressure (Saturated Steam Service)13.2 bar g at 196
• Maximum Operating Temperature260
• Minimum Operating Temperature0.000000000000 °C
• ModelS1 SG Iron Sparator
• Model NumberS1 SG Iron Sparator
• NPT Pipe ConnectionYes
• Pipe Radius12.500000000000 mm
• Pipe Size25.000000000000 mm
• Pipe Surround40.000000000000 mm
• PMA Maximum Allowable Pressure16 bar g @ 100
• PMO Maximum Operating Temperature (Saturated)13.8 bar g
• Product Documentation Linkwww.spiraxsarco.com/pdfs/TI/p023_02.pdf
• Product Linkwww.spiraxsarco.com/uk/products-services/products/pipeline-and-steam-ancillaries/separators-and-insulation-jackets.asp
• Replacement Cost0
• SG IronSpirax_Sarco-SG_Iron
• SizeDN25
• StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 /23/EC.
• SteelSpirax_Sarco-Steel
• TMA Maximum Allowable Temperature300
• TMO Maximum Operating Temperature200
• Type CommentsDN25
• Type NameDN25
• Uniclass 290-20-75/325
• URLwww.spiraxsarco.com/uk/
• Volume3.150000000000 m³
• Warranty Duration Labour0
• Warranty Duration Parts0
• Warranty Duration UnitYears
• Weight8.100000000000 kg