Fig 7 Carbon Steel Strainer

5k
0
- / 5
Rate this product

-

Compliant

BS1192:4

Compliant

BSB

Compliant

Object Data

2 Revision

Last Updated

13/07/2020

Download BIM

Add to collection

Available for:

Pipeline strainers are essential to keep steam pipelines clean and protect equipment. Even small pieces of debris (such as scale, rust, jointing compound or weld metal) can cause major damage to complex items of plant.

This download includes all available size variations for the Spirax Sarco Fig 7 Strainer.

Further information can be found on Spirax Sarco: Strainers and Filters for steam systems | UK | Spirax Sarco

_bimspec_guid0
_created byDayle Zieleniewski
_current revision1
_distributed bywww.bimstore.co.uk
A406.000000000000 mm
Assembly CodeD30
Asset Identifier
Asset TypeFixed
B206.000000000000 mm
BodyCarbon steel ASTM A216 WCB
Body Design ConditionsPN16
Body Dia225.000000000000 mm
Body Radius112.500000000000 mm
C406.000000000000 mm
CapCarbon steel ASTM A216 WCB
Cap Champer Offset25.000000000000 mm
Cap GasketReinforced exfoliated graphite
Cap NutsCarbon steel ASTM A194 2H
Cap Radius145.000000000000 mm
Cap StudsCarbon steel ASTM A193 B7
Cap Thickness'20.000000000000 mm
Carbon SteelSpirax_Sarco-Carbon_Steel
CertificationThis product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
Classification NameUniclass1.4
Classification ValueL7136
Created ByUKEnquiries@SpiraxSarco.com
Created OnJuly 2014
D247.000000000000 mm
DescriptionThe Fig 7 is a carbon steel integrally flanged pot type strainer. The standard stainless steel screen is 3.2 mm perforations. The body has two bosses that can be drilled and tapped to accomodate pressure gauges and the cover has a 5/8 inch UNC-2B tapping for fitting an eyebolt. The body can also be drained of condensate via a drain plug.
Designed for a maximum cold hydraulic test pressure of: bar g24
DisposalThe product is recyclable. No ecological hazard is anticipated with disposal of this product, providing due care is taken.
Documentation Installation Guidewww.spiraxsarco.com/pdfs/IM/s60_18.pdf
Drain PlugSteel
Drain Plug Dia20.000000000000 mm
Drain Plug Ext127.500000000000 mm
Drain Plug Offset33.000000000000 mm
Duration UnitYears
Expected Life0
Flange Dia345.000000000000 mm
FrameMild steel BS 970 070 M20
Installation NoteThe strainer should be fitted in a horizontal pipeline in the direction of flow as indicated on the body, with the cover at the top. Suitable isolation valves must be installed to allow for safe maintenance and trap replacement.
K Coefficient1196
Loss Method2
Maintenance NoteMaintenance can be completed with the strainer in the pipeline, once the safety procedures have been observed. It is recommended that a new gasket is used whenever maintenance is undertaken.
ManufacturerSpirax Sarco Ltd
MaterialCarbon Steel
Minimum Operating Temperature10.000000000000 °C
ModelFig 7 Carbon Steel Strainer
Model NumberFig 7 Carbon Steel Strainer
Nut Offset125.000000000000 mm
Optional ExtrasPressure gauge connections - Bosses are provided on the body upstream and downstream of the screen which can be drilled and tapped to accommodate pressure gauges.
Pipe Radius100.000000000000 mm
Pipe Size200.000000000000 mm
PMA Maximum Allowable Pressure16 bar g @ 100
PMO Maximum Operating Temperature (Saturated)16 bar g @ 100
Product Documentation Linkwww.spiraxsarco.com/pdfs/TI/p063_03.pdf
Replacement Cost0
Screening Area0.213000000000 m²
SizeDN200
Spare PartsStrainer Screen (State material, size of perforations and size of strainer), Cap Gasket (Packet of 3), Set of cap studs and nuts (DN200 - set of 8, DN250 - set of 10)
Spare PartsStrainer Screen (State material, size of perforations and size of strainer), Cap Gasket (Packet of 3), Set of cap studs and nuts (DN200 - set of 8, DN250 - set of 10)
StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark CE when so required.
SteelSpirax_Sarco-Steel
Strainer ScreenStainless steel ASTM A240 316L
TMA Maximum Allowable Temperature300
TMO Maximum Operating Temperature300
Type CommentsDN200
Type NameDN200
Uniclass 290-25-45/350
URLwww.spiraxsarco.com/uk/
WarningThe strainer cap gasket contains a thin stainless steel support ring, which may cause physical injury if it is not handled and disposed of carefully.
Warranty Duration Labour0
Warranty Duration Parts0
Warranty Duration UnitYears
Weight84.000000000000 kg