Fig 37 SG Iron Strainer

Object metadata

• _bimspec_guid0
• _created byDayle Zieleniewski
• _current revision0
• _distributed bywww.bimstore.co.uk
• 12 NutNo
• 8 NutYes
• A350.000000000000 mm
• A offsets318.000000000000 mm
• Assembly CodeD30
• Asset TypeFixed
• B255.000000000000 mm
• Blend End123.000000000000 mm
• BodySG iron DIN 1693 GGG 40
• Body Design ConditionsPN40
• Body Radius62.500000000000 mm
• C415.000000000000 mm
• CapCarbon steel EN-GJS-400-15
• Cap Dia175.000000000000 mm
• Cap GasketReinforced exfoliated graphite
• Cap NutsCarbon steel BS 3692 Gr.
• Cap StudsCarbon steel BS 4439 Gr. 8.8
• Cap VisNo
• Carbon SteelSpirax_Sarco-Carbon_Steel
• Cast IronSpirax_Sarco-Cast_Iron
• CertificationThe product is available a manufacturers' Typical Test Report for the body and cap as standard and EN 10204 3.1 to special order at extra cost. Note: All certification/inspection requirements must be stated at the time of order placement.
• Classification NameUniclass1.4
• Classification ValueL7136
• Cover VisYes
• Created ByUKEnquiries@SpiraxSarco.com
• Created OnJuly 2014
• D125.000000000000 mm
• DescriptionThe Fig 37 is an SG iron integrally flanged Y-type strainer. The standard stainless steel screen in the DN15 to DN80 size range is 0.8 mm perforations, in the DN100 to DN200 it is 1.6 mm perforations. As options other perforations and mesh sizes are available as well as monel screens. The strainer cap can be drilled and tapped for blowdown and drain valves if required.
• Designed for a maximum cold hydraulic test pressure of: bar g24
• DisposalThe product is recyclable. No ecological hazard is anticipated with disposal of this product providing due care is taken.
• Documentation Installation Guidewww.spiraxsarco.com/pdfs/IM/s60_18.pdf
• Documentation Technicalwww.spiraxsarco.com/pdfs/TI/p081_01.pdf
• Duration UnitYears
• Expected Life0
• Flange Dia220.000000000000 mm
• Flange Thickness16.000000000000 mm
• Installation NoteThe strainer should be installed in the direction of flow, as indicated on the body. On applications involving steam or gases the pocket should be in the horizontal plane. On liquid systems the pocket should point downwards. Suitable isolation valves must be installed to allow for safe maintenance and trap replacement.
• K Coefficient155
• Loss Method2
• ManufacturerSpirax Sarco Ltd
• MaterialSG Iron
• Minimum Operating Temperature10.000000000000 °C
• ModelFig 37 SG Iron Strainer
• Model NumberFig 37 SG Iron Strainer
• Monel Strainer ScreenNo
• Nut Size24.000000000000 mm
• Optional ExtrasStainless Steel Strainer Screens (Perforations 1.6 or 3mm, Mesh 40,100,200) Monel Strainer Screens (Performations 0.8 or 3mm, Mesh 100), Blowdown or Drain Valve Connections (The cap can be drilled to enable a blowdown or drain valve to be fitted. Please see Product Information Link for sizes.)
• Pipe Radius50.000000000000 mm
• Pipe Size100.000000000000 mm
• Pipe Straight End25.000000000000 mm
• Plate Offset64.500000000000 mm
• PMA Maximum Allowable Pressure40 bar g @ 120
• PMO Maximum Operating Temperature (Saturated)40 bar g @ 120
• Product Documentation Linkwww.spiraxsarco.com/pdfs/TI/p081_01.pdf
• Replacement Cost0
• Screening Area0.054000000000 m²
• SG IronSpirax_Sarco-SG_Iron
• SizeDN100
• Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
• Spare PartsStrainer screen (State material, size of perforations or mesh and size of strainer), Cap gasket (packet of 3)
• Stainless Steel Strainer ScreenYes
• StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC
• Strainer Body125.000000000000 mm
• Strainer Diameter100.000000000000 mm
• Strainer Length130.000000000000 mm
• Strainer Radius62.500000000000 mm
• Strainer ScreenAustenitic Stainless Steel ASTM A240 316L
• Strainer Screen Size0.8
• TMA Maximum Allowable Temperature350
• TMO Maximum Operating Temperature350
• Type CommentsDN100
• Type NameDN100
• Uniclass 290-25-45/350
• URLwww.spiraxsarco.com/uk/
• WarningThe strainer cap gasket contains a thin stainless steel support ring, which may cause physical injury if not handled and disposed of carefully.
• Warranty Duration Labour0
• Warranty Duration Parts0
• Warranty Duration UnitYears
• Weight36.000000000000 kg